2017 marks our 37 years of Gunsmithing Service and 13 years Airgunsmith has been providing quality parts and service online to airgun hobbyist and professionals world wide

Benjamin 132

Benjamin 132 Service, Rebuilding, Pump arm Repair, Dent Removal


Benjamin 132 Rebuilding

Benjamin 132 Manual 

Rebuild Kits for the Benjamin 132 are now available.
 The kits are built in the USA in our shop from new modern materials
resulting in superior quality and performance.
For more information on the Airgunsmith Benjamin 132 performance rebuild kits
Or to have us rebuild your Benjamin 132 email using button below



Benjamin 132 Rebuild Information

  Benjamin 132 Rebuild Service
with Piston $60.00
Priority Shipping $8.95

 Total $68.95

Benjamin 132 Rebuild Kit

Benjamin 132
Tool Set & Rebuild Kit


Pricing on Benjamin 132 parts are as follows.

Piston $25.00 each
Seal Kit $10.00 each
Piston Seal kit Combined $32.00

Rebuild service, $35.00 includes everything needed except the piston,
Piston with rebuild $20.00.
Total parts and service for Benjamin 132 Rebuild $55.00

The AGS piston will never need to be replaced again, if the piston stops working the only replacement needed will be a 0.05 cent O-ring.


For more information on the Airgunsmith Benjamin 132 performance rebuild kits Or to have us rebuild your Benjamin 132 email using button below


Benjamin 132 Pistol


On the left is the complete Benjamin 132  rebuild kit with optional
seals On the right is the seal kit and is most commonly used
with a new piston.

The Benjamin 130, 132 and 137 valve seal seat is rounded
in shape which makes hard seal material non functional.
The softer seal material allows the spring pressure to mold over
the seat making a good seal. It is possible to reshape the seat
giving the seal a sharper edge allowing the use of a harder/Teflon seal, this is a one shot proposition and should only be used if the seat
in its original condition fails to seal.

This is the Rebuild Kit we offer for the Benjamin 132.
Everything is designed to have replaceable seals with the
hard parts being reusable, The Red Disk Is the Hardest,
The White is Teflon and the Orange is the softest.
also available is the thickness of the seal. Spring tension
is also changeable with the use of different springs.

Benjamin 132 Rebuilding Kit Options

The kit above shows the options  available. Teflon in two thickness polyurethane is the material of choice in two thickness. Lead seals are also available, I use them both but O-rings are a lot easier to work with.



Benjamin 132 Piston

Fits Benjamin 130, 132 & 137


Benjamin 132 Rebuild Kit
 With Piston



Benjamin 132 Valve Puller
 Made of High Quality Steel
 Solid Brass Knurled Knob
 Precision Fit Bushing






Benjamin 132 Valve Nut Tool

This tool can be used with a Tap-T Handle, 3/8 Open End Wrench, Crescent Wrench or a 1/4 Screw Driver.

I like to use a T-Handle, I have tried to use a 1/4" rod but at times the 1/4" rod has too little leverage, the valve nut can be extremely tight, when this happens a large crescent wrench or a large t-handle gives the best leverage









Compare the Benjamin 132 with the 137


Copyright 2005-2018  www.airgunsmith.com All rights reserved.
  Benjamin 132 Pistol | Benjamin 132 |Custom Benjamin 132 |Airgun | Benjamin 132 Parts |Air |132 Pistol |132 Parts